LSOH Covered Copper Earthing Tape
LSOH Covered Copper Earthing Tape Application
Copper Tape is by far the most important component of any earth or structural lightning protection system.LSOH Covered Copper Grounding Tape is designed for use as a conductor in earthing and lightning protection systems. LSOH Covered Copper Earthing Tape is manufactured to BS EN 13601 and is annealed for ease of use.
LSOH Coated Copper Earthing Tape is mainly used as down conductors on a building’s structural lightning protection system. The copper is manufactured to BS EN 13601 and is annealed for ease of use.
This product is made to match the most common building materials and provide an aesthetic finish to the external lightning protection system. All LSOH coverings are UV established although some discoloration may occur over time.
LSOH Covered Copper Grounding Tape Construction
|Conductor material:||Bare copper tape|
LSOH Covered Copper Earthing Tape Physical Properties
|Thickness of LSOH sheath||2.0mm|
|Electrical resistence of copper at 20°C||0.0176Wmm2/m|
|Copper melting point||1083°C|
|Current density at which the conductor temperature rises
from 40°C to 150°C in a time of 1 s if all heat is retained in conductor
LSOH Covered Copper Earthing Tape Specification
|Colour||Dimensions||Cross Sectional Area / Thickness||Weight Per Metre||Standard Coil Size|
|Green||12.5mm x 1.5mm||18.75mm2||0.21kg||100m|
|Green||25mm x 3mm||75mm2||0.77kg||25m & 50m|
|Green||25mm x 6mm||150mm2||1.33kg||40m|
|Green||50mm x 3mm||150mm2||1.33kg||40m|
|Green||50mm x 6mm||300mm2||2.68kg||20m|
Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.