H1Z2Z2-K XLPE Photovoltaic Solar Wire
H1Z2Z2-K XLPE Photovoltaic Solar Wire Application
H1Z2Z2-K TÜV approved solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. For free movable or fixed installation in photovoltaic installations. The cable may be used indoor, outdoor, on earth (please note the laying instruction), in explosion hazard areas in industry and agriculture. The cable is considered to short-circuit and earth-fault safe.
This H1Z2Z2-K cable is specially designed for the connection of photovoltaic panels. This versatile single-conductor cable is designed to meet the varying needs of the solar industry. Highly flexible cable, compatible with all major connectors. Suitable for wet, damp, and humid locations.
Being flame protected with a halogen-free fire retardant system with low smoke properties.these cables are designed for safety in case of fire.
H1Z2Z2-K XLPE Photovoltaic Solar Wire Construction
| Conductor material: | Bare copper strands Class 5 to IEC 60228 |
| Insulation: | electronic beam cross-linked compound |
| Insulation: | electronic beam cross-linked compound, Flame retardant |
H1Z2Z2-K XLPE Photovoltaic Solar Wire Technical Data
| Rated Voltage U0/U | DC: 1,5/1,5 kV;AC: 1,0/1,0 kV |
| Maximum Permitted Voltage | A.C:1,2/1,2 kV D.C: 1,8/1,8 kV |
| Voltage Withstand | AC 6.5KV DC 15KV for 5 min |
| Minimum Bending Radius | 4×OD (fixed), 15×OD (flexing) |
| Anticipated Period Of Service | 25 years |
H1Z2Z2-K XLPE Photovoltaic Solar Wire Thermal Performance
| Ambient Temperature | fixed installation: -40 °C up to +120 °C (max. conductor temperature according to EN 60216-2) |
| Installation Temperature | flexible: max. -25 °C |
| Short Circuit Temperature | 200℃/5 sec |
| High Temperature Pressure Test | According to EN 60811-3-1 |
| Damp-Heat Resistance | According to EN 50618 Table 2 |
H1Z2Z2-K XLPE Photovoltaic Solar Wire Chemical&Fire Performance
| Ozone Resistance | According to EN 50396 part 8.1.3 Method B |
| Weathering- UV Resistance | According to EN 50289-4-17, Method A |
| Acid & Alkaline Resistance | According to EN 50618, Annex B: |
| Flame retardant | According to IEC 60332-1, DIN EN 60332-1-2 |
| Halogen free | According to EN 50267-2-1, IEC 60754-1 |
H1Z2Z2-K XLPE Photovoltaic Solar Wire Specification
| No. of Cores ×Nominal Cross Section | No. of Stranding | Conductor Diamater | Max.D.C Resistance at 20℃ |
| No. ×mm² | – | mm | Ω/km |
| 1×1.5 | 30/0.25 | 1.57 | 13.7 |
| 1×2.5 | 49/0.25 | 2.02 | 8.21 |
| 1×4.0 | 52/0.30 | 2.5 | 5.09 |
| 1×6.0 | 84/0.30 | 3.3 | 3.39 |
| 1×10 | 78/0.40 | 4.25 | 1.95 |
Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All pictures shown are for illustration purposes only. The actual product may vary. All the information is provided in good faith and is believed to be correct at the time of publication.
