PV1500DC-F EBXL Photovoltaic Solar Cable Application
PV1500DC -F TÜV approved solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. For free movable or fixed installation in photovoltaic installations. The cable may be used indoor, outdoor, in earth (please note the laying instruction), in explosion hazard areas in industry and agriculture. The cable is considered to short-circuit and earth-fault safe.
This PV1500DC -F cable is based on the TÜV specification 2 Pfg 1990/05.12. The new cable is therefore suitable for PV systems with an operating voltage of 1500V DC. The electron beam cross-linked quality of the cable series is guaranteed here, too. Also, the TÜV type PV1500DC-F has been certified in accordance with 2 Pfg 1990/05.12.
Being flame protected with a halogen-free fire retardant system with low smoke properties.these cables are designed for safety in case of fire.
PV1500DC-F EBXL Photovoltaic Solar Cable Construction
| Conductor material: | Bare copper strands Class 5 to IEC 60228 |
| Insulation: | electronic beam cross-linked compound |
| Insulation: | electronic beam cross-linked compound,Flame retardant |
PV1500DC -F EBXL Photovoltaic Solar Cable Electric Performance
| Rated Voltage U0/U | DC1500V |
| Maximum Permitted DC Voltage | 1.8 kV DC (conductor/conductor, non earthed system, circuit not under load) 2 PfG 1990/05.12 |
| Voltage Withstand | AC 11KV DC 15KV for 5 min |
PV1500DC -F EBXL Photovoltaic Solar Cable Thermal Performance
| Ambient Temperature | fixed installation: -40 °C up to +120 °C (max. conductor temperature according to EN 60216-2) |
| Installation Temperature | flexible: max. -25 °C |
| Short Circuit Temperature | 200℃/5 sec |
| High Temperature Pressure Test | According to EN 60811-3-1 |
| Damp-Heat Resistance | According to EN 60068-2-78 with 85% humidity |
PV1500DC -F EBXL Photovoltaic Solar Cable Mechanical Performance
| Minimum Bending Radius | 4×OD (fixed), 15×OD (flexing) |
| Dynamic Penetration | According to 2 PfG 1990 Annex F |
| Notch Propagation | According to 2 PfG 1990 Annex B |
| Anticipated Period Of Service | 25 years |
PV1500DC-F EBXL Photovoltaic Solar Cable Chemical&Fire Performance
| Ozone Resistance | According to EN 50396 part 8.1.3 Method B |
| Weathering- UV Resistance | According to HD 605/A1 |
| Acid & Alkaline Resistance | According to EN 60811-2-1 (Oxal acid and sodium hydroxide) |
| Flame retardant | According to IEC 60332-1, DIN EN 60332-1-2 |
| Halogen free | According to EN 50267-2-1, IEC 60754-1 |
PV1500DC-F EBXL Photovoltaic Solar Cable Specification
| No. of Cores ×Nominal Cross Section | No. of Stranding | Nominal Overall Diamater | Current at 60℃ |
| No. ×mm² | – | mm | A |
| 1×1.5 | 30/0.25 | 5.2 | 30 |
| 1×2.5 | 49/0.25 | 5.65 | 41 |
| 1×4.0 | 52/0.30 | 6.1 | 55 |
| 1×6.0 | 84/0.30 | 6.8 | 70 |
| 1×10 | 84/0.40 | 8.2 | 98 |
| 1×16 | 128/0.40 | 9.3 | 132 |
| 1×25 | 192/0.40 | 10.8 | 176 |
| 1×35 | 276/0.40 | 12.9 | 218 |
Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
Reviews
There are no reviews yet.