NSSHCGEOEU Longwall Coal Cutter Cable(Low Tensile Stress)0.6/1KV
NSSHCGEOEU Coal Cutter Cable 0.6/1KV Application
NSSHCGEOEU Coal Cutter Cables are used for the connection of mobile machines under extremely high mechanical loads, predominantly in mining situations,e.g. for coal-cutting machines, suitable for extreme bending loads under low tensile stress.
The phase-concentric monitoring shield and the common concentric earth conductor, in conjunction with appropriate monitoring equipment, make it possible to monitor the cable for insulation faults and damage resulting from external influences. The cable can be delivered with 2, 3 or 6 pilot cores.
These NSSHCGEOEU cables comply with DIN VDE 0250 part 812 Standards.
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Construction
| Conductors | Flexible stranded tinned copper conductor. |
| Insulation | Heat resistant 3GI3 rubber based on EPR. |
| Outer Conductor Layer | Easy stripable outer conductive layer. |
| Pilot Cores | Copper strand and steel braid conductor capable of expansion and compression with EPRrubber insulation. |
| Monitoring Conductor | Spiral of tinned copper wires above the pilot cores, covered with a semi-conductive tape. |
| InnerSheath | Rubber type GM1b. |
| Armor/Earth Conductor | Concentric earth conductor as the spiral of copper and steel wires, fiberglass tape, embedded in the outer sheath which prevents sheath exchanging. |
| Outer Sheath | Rubber type 5GM5, abrasion, and tear-resistant, oil-resistant, and flame retardant. |
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Technical Data
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Max. conductor temperature in service | 90°C |
| Max. short-circuit temperature of conductor: | 200°C |
| Limit surface temperature fixed installed | -40°C~ 80°C |
| Limit surface temperature, flexible application | -25°C ~ 80°C |
| Oil resistance | Yes |
| Flame retardant | Yes |
| Dynamic bending radius | 4(xD) |
| Static bending radius | 1.5(xD) |
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Specifications
| Number of Cores× Nominal Cross Section |
Minimum Overall Diameter |
Maximum Overall Diameter |
Nominal Weight |
| No.×mm² | mm | mm | kg/km |
| 3×16/16KON+2ST+UEL | 35 | 38 | 2130 |
| 3×25/16KON+2ST+UEL | 38 | 41 | 2790 |
| 3×35/16KON+2ST+UEL | 41 | 45 | 3390 |
| 3×50/25KON+2ST+UEL | 47 | 51 | 4340 |
| 3×70/35KON+2ST+UEL | 52 | 56 | 5680 |
| 3×95/50KON+2ST+UEL | 58 | 62 | 7180 |
| 3×25/16KON+3×(1.5ST+UEL) | 38 | 41 | 2920 |
| 3×35/16KON+3×(1.5ST+UEL) | 41 | 45 | 3630 |
| 3×50/25KON+3×(1.5ST+UEL) | 45 | 48 | 4500 |
| 3×70/35KON+3×(1.5ST+UEL) | 48 | 53 | 5850 |
| 3×95/50KON+3×(1.5ST+UEL) | 52 | 56 | 7400 |
| 3×120/70KON+3×(1.5ST+UEL) | 58 | 63 | 8300 |
| 3×150/70KON+3×(1.5ST+UEL) | 62 | 68 | 9300 |
Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
Reviews
There are no reviews yet.